#Trouble shoot prizmo 4010 manual#
Operator’s Instruction Manual for detailed operation. Simplex is listed in the Yellow case of trouble, notify: INSTRUCTIONS ARE INTENDED TO BE FRAMED AND MOUNTED ADJACENT TO THE PANEL FOR READY REFERENCE.
your system configuration does not match this sheet, consult for specific operations. a short delay, the system returns to normal and displays following. necessary, press (SYSTEM RESET) when the abnormal has been corrected. Refer to 526-444 label for publications and revisions). Response personnel should restore or replace the defective device wire, notification appliance, etc.) in accordance with device (see the 574-709 manual for additional information on or dirty troubles. system displays the following after a completed System with no alarms present: any key to return to the SYSTEM NORMAL screen. Just turn the control knob on the back to add any color you can imagine to your scene These images were lit with two FACTOR Prizmo 1x1 lights, with the Prizmo on the left set to red and the Prizmo on the right set to blue. TO RESET THE SYSTEM When the alarm condition clears, restore or replace all affected (smoke detectors, pull stations, etc.) in accordance with the provided with each device. FACTOR Prizmo RGB+W lights create stunning moods and colors. TO SILENCE THE SIGNALS the (ALARM SILENCE) key and read the display. Read the Alarm information on the display. the Trouble information on the display (see example below). the (TROUBLE ACK) key under the flashing yellow LED. tone-alert is silenced and the display shows pertinent information, such as shown below. the (ALARM ACK) key under the flashing red LED. Read and follow the instructions on display (see example below). A Condition is handled in a similar manner. Trouble Condition is described in this example. Read and follow the instructions the display. LED IS FLASHING AND TONE-ALERT IS PULSING LED IS FLASHING AND TONE-ALERT IS ON STEADY = 3 -102 = 0 = 0 = 0 * TROUBLE * * = 0 = 3 ACK to review ALARM LED ALARM KEY SYSTEM RESET KEY YELLOW TROUBLE LED TROUBLE KEY Unlock and open the panel door. taken during a fire depend upon local practices. ALARM ALARM LED (FLASHING) ALARM KEY 1 2 3 FIRE ALARM SYSTEM OPERATING INSTRUCTIONS AN ALARM/TROUBLE/SUPERVISORY CONDITION SAFETY AND THE SAFETY OF THOSE AROUND YOU ALWAYS COMES FIRST.